Galaxy S3 i747M 4.1.2 Unlock


Galaxy S3 i747M 4.1.2 Unlock Successfully with octoplus box.

Here is log info:

Welcome to Octoplus/Octopus Box Samsung software version 1.4.0
———————————————————————————–
To connect SGH-I747M phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on “USB Debugging” option.
4. When message is appear press “Yes”.
5. Go to dial window.
6. Enter “*#7284#” number.
7. Set “UART” radio button to “MODEM” value.
8. Go to “Qualcomm USB Settings”.
9. Select “DM+Modem+ADB”.
10. Close window.
11. Go to dial window.
12. Enter “*#9090#” number.
13. Set “Diag config” to “UART” value.
14. Restart phone.
15. Press “Read Info” in software.
———————————————————————————–
Platform: Samsung Android
Selected port: COM5
Selected model: SGH-I747M
Phone was not found on the selected port!
Searching for USB diagnostic port…
Connecting to phone on COM350
Phone connection failed
Connecting to phone on COM352
Mode: Normal
Phone model: SGH-I747
Firmware compiled date: May 19 2013
Firmware compiled time: 23:00:00
Firmware released date: Jun 3 2013
Firmware released time: 20:52:56
Phone IMEI: 354651-05-026450-8
SW Version: M8960A-AAAANAZM-1.0.443072
———————————————————————————–
Platform: Samsung Android
Selected port: COM352
Selected model: SGH-I747
Mode: Normal
Phone model: SGH-I747
Firmware compiled date: May 19 2013
Firmware compiled time: 23:00:00
Firmware released date: Jun 3 2013
Firmware released time: 20:52:56
Phone IMEI: 354651-05-026450-8
SW Version: M8960A-AAAANAZM-1.0.443072
Unlocking phone…
Reading security failed
Phone unlocking failed
———————————————————————————–
Platform: Samsung Android
Selected port: COM352
Selected model: SGH-I747
Mode: Normal
Phone model: SGH-I747
Firmware compiled date: May 19 2013
Firmware compiled time: 23:00:00
Firmware released date: Jun 3 2013
Firmware released time: 20:52:56
Phone IMEI: 354651-05-026450-8
SW Version: M8960A-AAAANAZM-1.0.443072
Reading phone unlock codes. It can take some time, please wait…
Reading security failed
Read codes failed
———————————————————————————–
To connect SGH-I747M phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on “USB Debugging” option.
4. When message is appear press “Yes”.
5. Go to dial window.
6. Enter “*#7284#” number.
7. Set “UART” radio button to “MODEM” value.
8. Go to “Qualcomm USB Settings”.
9. Select “DM+Modem+ADB”.
10. Close window.
11. Go to dial window.
12. Enter “*#9090#” number.
13. Set “Diag config” to “UART” value.
14. Restart phone.
15. Press “Read Info” in software.
Selected firmware file: I747MUMBLK3_I747MTCEBLK4_TCE_Android_
4.1.1.oct
Please switch your phone to the download mode and connect it to a
PC.
To put SGH-I747M phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold “Volume – ” + “Home” + “Power” buttons.
3. When phone turns on press “Volume+” button.
Found phone on
Firmware write started.
Writing ABOOT section…
ABOOT section has been written successfully.
Writing BOOT section…
BOOT section has been written successfully.
Writing CACHE section…
CACHE section has been written successfully.
Writing MODEM section…
MODEM section has been written successfully.
Writing RECOVERY section…
RECOVERY section has been written successfully.
Writing RPM section…
RPM section has been written successfully.
Writing SBL2 section…
SBL2 section has been written successfully.
Writing SBL3 section…
SBL3 section has been written successfully.
Writing SYSTEM section…
SYSTEM section has been written successfully.
Writing TZ section…
TZ section has been written successfully.
Firmware writing successfully completed.
———————————————————————————–
Platform: Samsung Android
Selected port: COM5
Selected model: SGH-I747M
Mode: Normal
Phone model: SGH-I747
Firmware compiled date: Sep 17 2012
Firmware compiled time: 02:00:00
Firmware released date: Nov 24 2012
Firmware released time: 11:57:08
Phone IMEI: 354651-05-026450-8
SW Version: M8960A-AAAANAZM-1.0.443028
———————————————————————————–
Platform: Samsung Android
Selected port: COM5
Selected model: SGH-I747
Mode: Normal
Phone was not found on the selected port!
Searching for USB diagnostic port…
No diagnostic ports found!
Connecting to phone on COM5
Mode: Normal
Phone model: SGH-I747
Firmware compiled date: Sep 17 2012
Firmware compiled time: 02:00:00
Firmware released date: Nov 24 2012
Firmware released time: 11:57:08
Phone IMEI: 354651-05-026450-8
SW Version: M8960A-AAAANAZM-1.0.443028
Unlocking phone…
Phone is successfully unlocked
To finish the operation, please restart the phone via phone’s menu
(don’t disconnect the battery!)
———————————————————————————–
Platform: Samsung Android
Selected port: COM5
Selected model: SGH-I747
Mode: Normal
Phone model: SGH-I747
Firmware compiled date: Sep 17 2012
Firmware compiled time: 02:00:00
Firmware released date: Nov 24 2012
Firmware released time: 11:57:08
Phone IMEI: 354651-05-026450-8
SW Version: M8960A-AAAANAZM-1.0.443028
Reading phone unlock codes. It can take some time, please wait…
Connecting to server…
Connect successfully to server
Checking smart card…
Smart card successfully checked
Checking operation…
Operation successfully checked
NCK unlock code: *#7465625*638*91703695#
NSCK unlock code: *#7465625*782*00000000#
SPCK unlock code: *#7465625*77*00000000#
———————————————————————————–
Platform: Samsung Android
Selected port: COM5
Selected model: SGH-I747
Phone was not found on the selected port!
Searching for USB diagnostic port…
No diagnostic ports found!
Connecting to phone on COM5
Phone connection failed
Selected action can’t be performed
———————————————————————————–
To connect SGH-I747M phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on “USB Debugging” option.
4. When message is appear press “Yes”.
5. Go to dial window.
6. Enter “*#7284#” number.
7. Set “UART” radio button to “MODEM” value.
8. Go to “Qualcomm USB Settings”.
9. Select “DM+Modem+ADB”.
10. Close window.
11. Go to dial window.
12. Enter “*#9090#” number.
13. Set “Diag config” to “UART” value.
14. Restart phone.
15. Press “Read Info” in software.
———————————————————————————–
Platform: Samsung Android
Selected port: COM5
Selected model: SGH-I747M
Mode: Normal
Phone model: SGH-I747
Firmware compiled date: Sep 17 2012
Firmware compiled time: 02:00:00
Firmware released date: Nov 24 2012
Firmware released time: 11:57:08
Phone IMEI: 354651-05-026450-8
SW Version: M8960A-AAAANAZM-1.0.443028
Creating NVM backup
NVM reading process canceled
Repairing NVM for SGH-I747 phone…
Writing NVM canceled
NVM repair completed successfully
Please, restart the phone to apply changes
———————————————————————————–
Platform: Samsung Android
Selected port: COM349
Selected model: SGH-I747
Mode: Normal
Phone model: SGH-I747
Firmware compiled date: Sep 17 2012
Firmware compiled time: 02:00:00
Firmware released date: Nov 24 2012
Firmware released time: 11:57:08
Phone IMEI: 354651-05-026450-8
SW Version: M8960A-AAAANAZM-1.0.443028
Creating NVM backup
Reading NVM done!
Repairing NVM for SGH-I747 phone…
NVM repair completed successfully
Please, restart the phone to apply changes

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s